88" / 2250mm Twin-Wire Paper Machine
Mfg: Escher, Kufferath, Honeywell
Condition: Used
Stock Number: PMA-132
Request a quote on stock# PMA-132| Specification | Description |
|---|---|
| Basis Weight: | 30-280 gsm |
| Grades Produced: | Printing, Writing, Luxury Wrap |
| Running Speed: | 500 m/min, 1625 FPM |
| Production: | 140 TPD |
| Terms: | "As-is, where-is" |
Equipped With:
PAPER MACHINE:
- Escher Wyss headbox
- Escher Wyss 10.7 meter stainless steel bottom wire section with double vacuum ceramic box (IBS)
- Kufferath 2550 mm top wire, Akumat SB model
- Press section. Central ceramic press with two contacts (bi nip). Dryness at exit: 46-47 %
- Offset press
- Pre-drying section consisting of (3) sections with (16) 1500 mm dia dryers rated 0 - 5 bar.
- Honeywell frame, 4031 model (for moisturize measure)
- BTG/UMV Twin reverse gravure, year 2.004 (to apply starch, coating sauces, etc. until 15 gsm per side) with air-turn system
- Post-drying section. 6 Dryers. Diam.: 1.500 mm.
- Honeywell Microflow system (curling) (Calcoil heating system)
- 2 Hunt & Moscrop mat-on-line presses (only supports and spares).
- Calender stack
- Honeywell 4000 system for grammage, moisture, ash and colour control
- Honeywell WIS hole detector (two cameras and software)
- Honeywell "Da Vinci" RAE 4 system for quality control
- Honeywell Alcont control system
- Control system distributed by PLC Omrom and Scada system
- Nash vacuum pumps
- Drive: Multi-motor AC system rebuilt in 2004
STOCK PREPARATION:
- Metso medium consistency, 23 m3 pulper. Capacity: 150 tpd. Year 2003
- Jylhavaara triple disc refiner. Power: 450 hp. Model: Jylha disc 720
- Pilao triconical refiner. Model: RTC 2000. Power: 450 hp
- Metso deflaker. Model: Optifiner DF0. Year: 2.003
- POM mixer. 2 m. Year: 2.003
- 4 Celleco cyclonic screens
- Emua-Jylhavaara separator (SP). Hole diam.: 1,8 mm.
- Krofta fiber recovery flotation system. Model: Celloflock 18
- Miconizer system. Capacity: 250 m3/h
This machine had rebuilds up until 2004
Alpine Corrugated Machinery, Inc
100 Challenger Road, Suite 304
Ridgefield Park, NJ 07660
201-440-3030
201-641-4090
info@alpinemachinery.com