AGNATI

Two (2) single facers mod. Master Multiflute
- Max mechanical speed 400 mtrs/min.
- Fingerless operation with positive air pressure
- Cartridge change time 5 min. with operator
- Four (4) cartridges: 2xB-flute, 1xCflute, 1xE-flute
- All corrugating rolls sets in Tungsten carbide
- Two (2) cartridges preheating stations
- Inclined conveyor to bridge
Noise reduction cabin for each single facer Two (2) preconditioners double drums 800mm dia.
Two (2) preheater drum 1100mm dia.
One (1) quadruple preheater mod. PRQR
- 2 drums 1100mm dia. 2 drums 900mm dia.
- All drums motorized
Five (5) reel stands mod. PBM
- Max load 4500 Kgs.
- Fast Hydraulic lifting of the harms
- Self centering of the harms
- Brakes RE
- Expandible chuks
Three (3) wax applicators
Five (5) autom. Splicers mod. GVR sc
- Three festoons
- Splicing speed 350 mtrs/min.
- Web tension control
Two level bridge conveyor
- Corraligner BVW 0320 E&L
- Tensionmaster PFW 323 E&L
- Haeting plate with direct steam at glue mach. Inlet One (1) double glue machine mod. Varibond
- Max operating speed 400 mtrs.min.
- Engraved glue roll 400mm dia.
- Return glue pump
Double facer mod. GPA 3+2
- 3 sections hot plates (18 plates) fabricated steel
- 2 sections traction
- VaryPress System
- Belt tension control
- Auto alignement top and bottom belts
One (1) Rotary shear mod. HRS90 High Speed 300
- Max speed single cut 300 mtrs/min.
- Max speed multiple cut 220mtrs/min.
- Cut length 830mm
- Cut sheets high speed ejector
Web leading table between shear a
Slitter scorer Slitterscorer mod. Powerset
- Tools for 8 boxes out
- Clean cut slitting
- Max operating speed 400mtrs/min.
- Two modules
- Order change at 300mtrs/min.
- Tools positioning for new order in 9 sec.
Web leading table to cut off unit
Cut-off Knife unit mod. TREL 90D-HP
- High Performance
- Max operating speed 350mtrs/min.
- Two 38kW drives and brush-less motors
- Feed section with 9,7kW motor and no crush wheels
- Exit conveyor mod. VEC-D with no crush wheels
Double down stacker mod. RDA
- Max mechanical speed 400mtrs/min.
- Max order change speed 350mtrs/min.
- Bottom station max sheet size 3,2x1,8mtrs.
- Top station max sheet size 4,2x2,2mtrs.
Quality control QC2
- Auto touch control panel for wet end control Productivity control
- Auto touch control panel for dry end control
- Single point entry orders
- Auto order change control